Pot Or Pan Dimensions; Turning On/Off; Adjusting The Power; Using The Flexible Area - SCHOLTES SOTH1900B Manuel D'utilisation

Choose a cooking pot or pan with a thick, flat bottom. This will help the heat distribute more evenly and make cooking easier.
Note: Do not leave empty pots or pans unsupervised on the induction hob..
Note: Do not put your pots and pans on the control panel.

1.4 Pot or pan dimensions

You have several zones for your pots and pans. Choose the one you want based on the size of your pot or pan. If the base of
your pot or pan is too small, the power indicator will flash and the hob will not work, even if the pot or pan is made from a
material that is compatible with induction heating. Do not use pots or pans that are smaller than the hob (see table below).
Cooking zone diameter (mm)
160
200
1/2 of the flexible area
All of the flexible area

1.5 Turning on/off

Press the on/off button (a) for your chosen hob. A "0 " will be displayed for each zone and the decimal point will flash for 20
seconds. After this, the hob will turn off automatically if you do nothing else. Choose a cooking zone (c). Adjust the power. The
zone will turn off automatically after a few seconds if you do not adjust the power.
Turning off one or several zones: Choose the zone you want to turn off and reduce the power by pressing the "-" button (e) juntil
it reaches 0. Alternatively, press the button to choose a cooking zone (c) and the "-" button (e) at the same time. You will hear a
long beeping sound, and the zone display with either turn off or show an "H" (to indicate that there is residual heat). You can also
turn off all zones at once by pressing the on/off button (a).

1.6 Adjusting the power

Press the "+" or "-" buttons (e) to choose a power from 1 to 9.
To use the "Booster" function, press the "+" button when you are already at power 9, or choose the cooking zone you want (c) and
immediately press the "-" then "+" buttons (e). The display will show a "P".
Note: If you use the "Booster" function on one zone, the power of the zone next to it will be limited. The display of the second
cooking zone will alternate between showing the power chosen and the limited power for a few seconds.
1.7 Using the lexible area
The flexible area can be used as one large zone or two independent smaller zones.
To use the zone as a large one, press the buttons to choose the zone on the right (c) at the same time. The display on the right
will show you that you are using the whole zone
Adjust the power and timer in the same way as for the normal cooking zones. To stop using the zone as one large hob, press the
buttons to choose the zone on the right (c) at the same time. The two smaller zones will display "0" and can once again be used
independently.
Turn the zone off in the same way as for the normal cooking zones.
You will hear a beeping sound, and the zone display with either turn off or show an " H" (to indicate that there is residual heat).
Minimum diameter of the pot or
pan base (mm)
110
120
120
200x120
. The display on the left shows the power.
24
Maximum diameter of the pot or
pan base (mm)
160
200
190
390x220