Table Des Matières; Introduction; Guarantee - Beko CLEARPOINT L100 Instructions De Montage Et De Service

Content:

Introduction

These instructions for installation and operation will help you to
become more familiar with the CLEARPOINT and enable you
to utilize the device within the intended scope of application.
Furthermore, the instructions contain important information for
ensuring safe, correct and economic operation.
The individual directions have to be followed precisely as de-
scribed in order to avoid hazards or damage. Additionally, it will
be necessary to observe the accident prevention regulations
valid in the operator's country and at the place of installation
together with the approved rules of engineering practice con-
cerning correct safety and work procedures.
All persons carrying out the installation, commissioning, mainte-
nance or repair of the product on the operator's premises must
have read and understood these instructions for installation and
operation. The instructions should be permanently available at
the place of installation.
2
english
Introduction ......................................
Guarantee ........................................
Safety rules ......................................
Areas of application .........................
Function ...........................................
Economic efficiency of filters ..........
Pressure vessel ordinance ...........
Installation ........................................
Filter element replacement .............
Accessories.......................................
Technical data ..................................
Dimensions .......................................
Mounting accessories .......................
Maintenance schedule .....................

Guarantee

CLEARPOINT filters are built according to the state of the
art and the approved safety rules of engineering practice.
However, the use of the product can endanger the health
& life of attending personnel or third parties and can have a
considerable negative effect on the product itself or on other
material assets if:
- the personnel is not properly trained,
- the product is used for purposes other than the
intended application,
- the device is not correctly serviced or main tained.
This can render the guarantee invalid.
CLEARPOINT devices are designed for gaseous neutral media
without any aggressive substances. Non-observance of this
condition excludes all liability claims. In the interest of further
development,
BEKO TECHNOLOGIES reserves the right to implement
changes at any time, while retaining the essential features of
the device, if such changes become necessary to enhance
the technical capacity of the device or for reasons of safety or
standard commercial practice.
6
6
7
7
8
8
8
8
9
9
18
19
20
21
CLEARPOINT L100 - L304