Angenieux OPTIMO 30-72 A2S Manuel Utilisateur page 20

3 MAINTENANCE
3.1 Cleaning
For maximum image quality, make sure the front and the rear optics are clean,
free of stain and dust. Use an optical cleaning solution and a soft tissue to
remove finger prints from the optics.
3.2 Lubrication
The zoom, focus and iris mechanism are factory lubricated. If the lens has been
stored for a long time or when used in cold environment, move each function
several times before using the lens.
After intensive use or in extreme conditions, it is important to check the good
working of the mechanisms and to carry out if needed a cleaning and re-
lubrification of the moving groups.
3.3 Moisture
To prevent humidity getting inside of the lens, protect the lens to keep it dry.
20 OPTIMO 30-72 A2S 3 - MAINTENANCE
3.4 Advance maintenance
The complete maintenance of this type of lens should only be performed by
highly qualified people or factory trained technicians. If you are uncertain of
your capacity to do the repair, send the lens to our THALES ANGENIEUX After
Sales Service. Our qualified technicians will ensure you proper handling of all
maintenance and repair related items.
Moreover, THALES ANGENIEUX can offer preventive maintenance operations to
keep your lens, always in perfect conditions.
Contact us:
France and international customer support at:
angenieuxservice@fr.thalesgroup.com
America customer support at : jbouchut@tccus.com