Angenieux OPTIMO 30-72 A2S Manuel Utilisateur page 44

6.1 ZOOM ROTATION ADJUSTMENT
That adjustment aligns the axis of the anamorphic group of the lens with the
axis of the sensor or film gate of the camera.
Unscrew the 3 locking screws (14) with a small screwdriver to remove rear
cover ring (15) (the black ring).
Unscrew the 4 locking screw (22) to remove the tracking cover ring (the red
ring).
Install the lens on a camera and shoot an object with a rectangular shape.
Untighten the 4 rotation locking screws (20) with a 1.5 mm Allen key.
Picture 10
Figure 10
44 OPTIMO 30-72 A2S 6 - ZOOM ROTATION ADJUSTMENT I REGLAGE D'ORIENTATION
With two 1.5 mm Allen keys, untighten the left rotation adjustment screw (21)
in one direction and the right screw in the opposite direction until you reach a
good rectangular shape on the camera view finder.
Screw the 4 rotation locking screws back.
Screw the 4 locking screws back to reinstall tracking cover ring (the red ring).
Screw the 3 locking screws back to reinstall rear cover ring (the black ring).
Picture 11
Figure 11