Part Iv: Advanced Features; Chapter 12. - Channel Setting - Baofeng UV-5R Série Mode D'emploi

4. Then if you switch to the page of Settings, you can adjust the limited parameters (VOX Function, Squelch, Backlit,
DTMF, FM Radio, Voice Prompt, Scanning, VFO Mode, etc).
21

Chapter 12. - Channel Setting

Simplex Channels
The following steps assume that you're in Variable Frequency Oscillator (VFO) mode.
1. On the A (upper) seven character display use the numeric keypad to enter the simplex frequency (simplex means
the transmit and receive frequencies are exactly the same).
2. Press the key to enter the menu.
3. Enter on the numerical keypad to get to the MEM-CH menu item.
4. Press to select.
5. Use the and keys to select an empty memory channel, or enter it directly on the numeric keypad. If the
characters "CH-" appear prepended to the channel number (000 to 127) that memory channel number already has
saved data. Example CH-000, CH-079 or CH-127 means those channel numbers already have saved frequencies
in them. If the displayed channel number is not prepended with the "CH-" characters that channel number is empty
and you can use it to store your new simplex frequency from step 1 above.
6. Press the key to confirm.
7. Press the key to exit the menu.
EXIT
Switch to Memory Channel (MR) mode with the (VFO/MR) key to test your new simplex channel. If you would like to
name your channel you will need to do that from a computer. More on that in the section called "Computer programming".
Duplex Channels
The following steps assume you're in Variable Frequency Oscillator (VFO) mode on the upper display. Duplex means
the transmit and receive frequencies are different.
1. Save your receive frequency as you would a regular simplex channel, as described in the previous section. This
saves your receive frequency to a channel number, example CH-123.
2. Exit the radio's settings menu by pressing the
3. Now on the A (upper) seven character display use the numeric keypad to enter your transmit frequency.

Part IV: Advanced Features

key if you are still in the settings menu.
EXIT
22