Chapter 6. - Dual Watch; Chapter 7. - Dtmf41 - Baofeng UV-5R Série Mode D'emploi

Scanning Your Selected Channels (Channel Mode)
The BAOFENG Radio can scan your saved programmed memory channels.
Scanning channels
1. Press and Hold SCAN for about 2 seconds to start scanning.
2. All saved channels will be scanned.

Chapter 6. - Dual Watch

In certain situations, the ability to monitor two channels simultaneously can be a valuable asset.
The BAOFENG Radio features Dual Watch functionality with the ability to scans between two frequencies at a fixed
interval and to option to lock the transmit frequency to one of the two channels, A or B, being monitored.
Enabling or disabling Dual Watch mode
1. Press the key to enter the menu
2. Enter on the numeric keypad to get to Dual Watch.
3. Press to select.
4. Use the and keys to enable or disable.
5. Press the key to confirm.
6. Press the key to exit the menu.
EXIT
Due to the way the BAOFENG Radio is constructed, whenever one of the A or B Frequencies.
(VFO/MR) goes active, it will default to transmit on that channel. This behavior can be inconvenient, especially when
monitoring a frequency, you should not transmit on. There is a menu option available to lock the transmitter to either
the A or B channel.
Locking the Dual Watch transmit channel
1. Press the key to enter the menu.
2. Enter on the numeric keypad to get to the TDR-AB menu item.
3. Press to select.
4. Use the and keys to select A (upper) or B (lower) display channel.
13
5. Press the key to confirm.
6. Press the key to exit the menu.
EXIT
If you want to momentarily override the lock without having to set the menu option to OFF, you can do so by pressing the
A/B key an instant before pressing the PTT.
Chapter 7. - DTMF
DTMF (Dual-Tone Multi-Frequency) is an in-band signaling method using dual sinusoidal signals for any given code.
Originally developed for telephony systems, it has proved a very versatile tool in many other areas.
In two-way radio systems, DTMF is most commonly used for automation systems and remote control. A common
example would be in amateur radio repeaters where some repeaters are activated by sending out a DTMF sequence
(usually a simple single-digit sequence).
DTMF frequencies and corresponding codes
1209 Hz
697 Hz 1
770 Hz 4
852 Hz 7
941 Hz *
The BAOFENG Radio has a full implementation of DTMF, including the A, B, C and D codes. The numerical keys,
as well as the and
D codes are accessible by pressing
To send DTMF codes, press the key(s) corresponding to the DTMF frequency(ies) you want to send while holding
down the PTT key.
If you have the keypad lock enabled on your radio, you can still send DTMF tones without having to unlock your radio.
1336 Hz 1477 Hz 1633 Hz
2 3 A
5 6 B
8 9 C
0 # D
keys correspond to the matching DTMF codes as you would expect The A, B, C and
, , , and keys respectively.
EXIT
14