Numeric Keypad; Keypad Lock - Baofeng UV-5R Série Mode D'emploi

Side key 1 - CALL
(Broadcast FM and Alarm Selection Button)
Press the CALL button momentarily to start the broadcast FM receiver. Another momentary press turns the broadcast
FM receiver off. If a signal is received on the active frequency or channel while you are listening to the broadcast FM,
the squelch will be activated to that frequency (as if scanning) and the squelch will remain activated until the signal
goes away; it will then switch back to broadcast FM.
Press and hold the MONI button to activate the alarm function. Press MONI (a short press) again to turn it off.
Side key 2 - MONI
(Monitor and Flashlight)
Press momentarily to turn on the LED flashlight. Another momentary press will cause the flashlight LED to flash.
Another momentary press turns the flashlight off.
Press and hold to monitor the signal of the selected channel A or B. This will turn off the squelch so you can listen
to the unfiltered signal.
VFO / MR - Mode Key
Pressing switches between Variable-frequency oscillator (VFO) Mode and Memory (MR) mode. Memory mode
is sometimes also referred to as Channel mode. Variable-frequency oscillator (VFO) mode allows the frequency to be
entered manually by pressing the digits of the numeric keypad.
To save frequencies to channel memory you must first be in Variable-frequency oscillator (VFO) mode.
A / B Select Key
The key switches between the A (upper) and B (lower) seven character displays. The frequency or channel on
the selected display becomes the active listening and transmit frequency or channel.
To save frequencies to channel memory you must first be on the A display.

Numeric Keypad

The BAOFENG Radio comes standard with a full numeric keypad.
05
The numeric keys have their secondary function printed on them (in reality, it's the settings menu shortcuts, more on
that in Chapter4, Working the Menu System).
The SCAN and keys, on the other hand, have actual secondary functions, scan and keypad lock respectively.
In channel mode, also acts as a transmit power shift key. While in channel mode, momentarily pressing
to change between High and Low transmit power. Do note that this does not alter the transmit power stored to
memory for that channel; it only affects the current transmit power. (Switching to another channel or another operating
mode including broadcast FM) will reset transmit power to what's stored in the channel's memory.)

Keypad Lock

The BAOFENG Radio features a keypad lock that locks out all keys except for the three side keys.
To enable or disable the keypad lock, press and hold the
You can also enable the keylock so that the radio automatically locks the keypad after ten seconds from the Settings
menu, see Chapter 4, Working the Menu System.
Star * Key
A short momentary press of the key enables the reverse (R) function (see Chapter 11 Repeaters). When listening to
broadcast FM a momentary press will start scanning the Broadcast FM Radio station frequencies. Scanning in
Broadcast FM will stop as soon as an active station is found, regardless of the scanner resume method in the device
settings menu.
To enable the scanner, press and hold the
BAOFENG Radio, keypad
key for about two seconds.
key for about two seconds. See Chapter 5, Scanning for details.
06