Tools And Materials Needed; Mounting Space - Haier HM1630 Guide De L'utilisateur

TOOLS AND MATERIALS NEEDED

# 1 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles

MOUNTING SPACE

" (41.9 cm)
16 ⁄
1
2
"
30 (76.2 cm)
66ʺ (167.6 cm)
or More from
the Floor to the
Top of the
Microwave
NOTES:
Section for exhaust duct preparation.
follow the instructions on the top cabinet template for power cord clearance.
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Cabinet Needs to
be 30ʺ (76.2 cm)
or More from the
Cooking Surface
"
30
(76.2 cm)
min.
Backsplash
Ruler or tape measure and
straight edge
Electric drill with 3⁄16", 1⁄2" and 5⁄8"
drill bits
Stud finder or
Hammer (optional)
Level
Bottom Edge of
English English
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
8