Mount The Microwave Oven - Haier HM1630 Guide De L'utilisateur

English
English
A3. ADAPTING MICROWAVE BLOWER FOR OUTSIDE
TOP EXHAUST
4. Place the blower unit back into the
opening.
5. Secure blower unit to microwave with
the screw removed in Step 1. Make
sure the screw is tight.
6. Replace blower plate with the screw
removed in Step 1. Make sure the
screw is tight.
7. Attach the exhaust adaptor to the
top of the blower plate by sliding it
into the guides of the blower plate.
Push in securely until it is in the
locking tabs. Take care to assure
that the damper hinge is installed so
that the damper swings freely.
A4. CHECK FOR PROPER DAMPER OPERATION
removed and damper pivots easily
before mounting microwave.
to assure proper alignment with your
house exhaust duct after the microwave
is installed.
A5. MOUNT THE MICROWAVE OVEN
FOR EASIER INSTALLATION
AND PERSONAL SAFETY, WE
RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the
nylon grommet around the power cord
hole to prevent cutting of the cord.
15
AFTER: Fan Blade
Openings Facing Top
Adaptor
Guide
Locking Tab
Blower Plate
Exhaust Adaptor
NOTE: We recommend using filler
blocks if the cabinet front hangs below
the cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from
overtightening screws.
Back of
Microwave
Back of
Microwave
Back of
Microwave
Damper
Back of
Microwave