Programming Procedure - Thrustmaster T.Flight HOTAS X Manuel De L'utilisateur

PROGRAMMING PROCEDURE

SAVING A "MANUAL PRESET"
Steps
1
2 Press and release the MAPPING button (7).
3
Press and release the button or direction to program.
Press and release the button or direction onto which you
4
Your "MANUAL PRESET" is now enabled and up to date
ERASING A "MANUAL PRESET"
Steps
1 Enable your MANUAL PRESET (6)
Press and hold the MAPPING button (7)
2
(and once again identical to the "AUTOMATIC PRESET").
RETURNING TO "FACTORY SETTINGS"
You can erase all of your programming or settings carried out on both PC (in 4 and 5 axes
modes) and PlayStation®3 with a single step:
Step
1
MAPPING + PRESET buttons
All of your "MANUAL PRESETS" (PC + PS3) or settings are now blank.
Note: This operation will completely restart your joystick
(on PC, we therefore recommend that you do this outside of games).
Action
Enable MANUAL PRESET (6)
by pressing the button.
wish to place your function.
(with your programming carried out).
Action
for 2 seconds.
Your "MANUAL PRESET" is now blank
Action
Simultaneously press the
9/12
PRESET LED
GREEN
FLASHES GREEN
SLOWLY
FLASHES GREEN
QUICKLY
GREEN
PRESET LED
GREEN
FLASHES GREEN
2 SECONDS
HOME / PS LED
FLASHES GREEN/RED
3 SECONDS