Charge Battery - Medela Invia Motion Mode D'emploi

Shoulder strap

Charge battery

1. Fully charge battery before first use. Charging time can be up to
4 hours. Open the Direct Current (DC) socket by pulling the small
protective cover open.
2. Connect the small end of the power supply into the Invia Motion
NPWT pump.
3. Plug the large end of the power supply into a wall outlet. The
moving bars on the battery display will indicate that charging is
occurring.
Battery Status Symbols
fully charged
Check the battery charge status periodically. Fully charge battery
before first use. Charging time can be up to 4 hours. Once fully
charged, the
Charging of the battery can be slowed when exposed to high
temperatures. Close the Direct Current (DC) socket by pressing the
small protective cover over the opening.
Belt strap
half full fully discharged
symbol will appear constantly on the display.
15