Sleeping; Showering, Bathing And Washing - Medela Invia Motion Mode D'emploi

If you observe a change in the vacuum level or an error condition,
move the Invia Motion NPWT system at least 1 foot (30 cm) from
the mobile phone when making or receiving calls. Turn the Invia
Motion NPWT system off and on again to reset it after an error
condition. Whenever possible, a safety distance of at least
1 foot (30 cm) between the Invia Motion NPWT pump and a mobile
phone is recommended.

Sleeping

– Make sure the Invia Motion canister/tubing set will not become
kinked.
– Prevent the Invia Motion NPWT pump from falling to the floor
during sleep.
– Always charge the Invia Motion NPWT pump while sleeping.

Showering, bathing and washing

– Do not use the Invia Motion NPWT pump while bathing or
showering.
– The Invia Motion NPWT pump can be disconnected for a short
period of time ( up to 20 minutes ) in order to change clothes or
perform personal hygiene. Discuss bathing plans with your
healthcare professional.
– Prevent the Invia Motion NPWT pump from getting wet.
– Do not place the Invia Motion NPWT pump where it can fall into a
shower, sink or tub.
– Do not touch the Invia Motion NPWT pump if it has fallen into
water. Unplug the device immediately from the electrical outlet,
disconnect the Invia Motion NPWT pump from the dressing and
contact your healthcare professional.
11