Electrical Diagram - hergom C-16/80 N Instructions D'installation, D'utilisation Et D'entretien

5. ELECTRICAL DIAGRAM

Switch positions
POSITION "0": The turbine starts at SILENT
SPEED (ECO) automatically when the appliance
has a fire, and the cast iron reaches 50ºC (where
the thermostat is located).
The turbine stops when the flame has
extinguished inside the Stove, and the
temperature of the cast iron drops below 50°C.
This position is RECOMMENDED when the user
wants the turbine to stop once the Stove is cold.
POSITION "1": The turbine starts at MINIMUM
speed MANUALLY. In this position, the turbines
do not stop even if the flame has gone out, and
the temperature of the cast iron is below 50ºC.
POSITION "2": The turbine starts at MAXIMUM
speed MANUALLY.
In this position, the turbine does not stop even if
the flame has gone out, and the temperature of
the cast iron is below 50ºC.
This position is recommended when a quick
transfer of heat from the Stove to the room is
required.
DO NOT DISCONNECT THE STOVE FROM
THE POWER SUPPLY