Becker Centronic Timecontrol TC52 Notice De Montage Et D'utilisation page 58

8. You can now set the SWITCHING TIME
setting with OK.
9. You can now set the BLOCKING TIME
setting with OK.
10. Press the MENU button to switch to Operating mode.
PROGRAM
PROG1/ INDIVIDUAL WEEK (individual switching time
PROG1/ INDIVIDUAL BLOCK (individual switching time
PROG1/ INDIVIDUAL INDIVIDUAL (individual switching time
vidual)
AUTO
WEEK
AUTO
1. Press the MENU button.
2. To select the PROGRAM menu, press the + button until PROGRAM appears.
3. Confirm with OK. PROG1 appears.
4. Confirm with OK.
5. Press the + button until INDIVIDUAL appears.
6. Confirm with OK.
7. Use the +/- buttons to select the required PROG1 INDIVIDUAL function:
INDIVIDUAL week
Press OK to go to the WEEK menu item (1–7). All further inputs will be applied
to each day of the week.
INDIVIDUAL block
Press OK to go to the BLOCK menu item (BLOCK 1 1–5, BLOCK 2 6,7). All fur-
ther inputs will be applied to BLOCK 1 (1–5) and BLOCK 2 (6,7).
58 - en
PROGRAM
SWITCHING TIME
using the +/- buttons. Confirm the
using the +/- buttons. Confirm the
PROG 1
SWITCHING TIME
for week)
for block1/2)
for indi-
INDIVIDUAL
PROGRAM