Grass Box; Adjusting Cutting Height - Stihl RMA 510 Notice D'emploi

English

Grass Box

WARNING
Place the machine on a firm and level
surface for the following work.
Fitting the Grass Box
Switch off the machine.
N
Remove the mulch insert, see
N
"Removing the Mulch Insert".
Remove the side discharge, see
N
"Removing the Side Discharge".
3 4 1
2
Open the discharge flap (1) and
N
hold it in position.
Hold grass box by the handle (2)
N
and engage the hooks (3) on the rod
(4).
Close the discharge flap (1).
N
Emptying the Grass Box
Switch off the machine.
N
12
Open the discharge flap (1) and
N
hold it in position.
Hold grass box by the handle (2)
N
and unhook it upwards.
Close the discharge flap (1).
N
Empty the grass box.
N

Adjusting Cutting Height

Different cutting heights can be
selected.
Setting Cutting
height
1 35 mm
2 43 mm
3 52 mm
4 60 mm
5 71 mm
6 79 mm
7 90 mm
Adjusting Cutting Height
1
Increase cutting height:
Pull lever (1) to rear of mower.
N
Reduce cutting height:
Pull lever (1) to front of mower.
N
The selected cutting height is shown.
(1.4 in)
(1.7 in)
(2 in)
(2.4 in)
(2.8 in)
(3 in)
(3.5 in)
RMA 510