Trebs Comfortmilk Mode D'emploi page 28

Fig 18. You can use the spare blender under the support base if you need it.
5. Troubleshooting
When the selector switch is
touched, there is no light and it
fails to work.
The supply cord is damaged.
The milk is not becoming a
foam.
ATTENTION
If above mentioned steps don't solve the problem, please contact your customer service.
6. Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their functionality
and safety. If these were put in the non-recyclable waste or were handled incorrectly,
they could be detrimental to human health and the environment. Therefore, do not
put your old device into the non-recyclable waste under any circumstances.
PLEASE NOTE

Utilize the collection point, established in your town, to return and recycle old electric and
electronic devices. If necessary, contact your town hall, local refuse collection service or
your dealer for information.

Ensure that your old device is stored safely away from children until it is taken away.
Check the power input: It is connected
to the main socket in the wall and that
there is electricity.
If it still fails to work. Contact a
qualified service dealer.
It must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order to
avoid a hazard.
Check that the blender is correctly
placed on the centre shaft.
28