WATER
Fig 13. On the support base, touching the selector switch is to heat while running. When you
firstly start the appliance, the indicator light will be on and the blender start to rotate the hot
chocolate/soup. In about 300-420 seconds, the appliance will stop automatically and the light
will be off. When you need to stop the appliance to work on halfway, you can touch the selector
switch again or lift up the pot off the base, and it will stop immediately.
4.
Cleaning & Maintenance
Before clean the inside after use, wait for the appliance to cool down.
When cleaning the inside, use a sponge or a soft brush together with normal washing up liquid.
Do not use any solvents or abrasive detergents. Sharp or hard instruments or steel wool is
strictly forbidden.
Take care! The heating element must not be scratched.
When cleaning outside of the appliance, just use a damp cloth. Keep attention not to wet any
electrical parts. Do not wash the appliance in the dishwasher.
WATER
WATER
WATER
WATER
Fig 14. You can take out the blender and wash it under tap water.
Fig 15. You can pour the tap water into the pot to clean it.
Fig 16. Do NOT put the support base of the heater into water.
Fig 17. The support base of the heater can NOT be washed in water nor rinsed under tap water.
27