Trebs Comfortmilk Mode D'emploi page 24

3. The use
Operation---milk foam
MILK
MAX
Fig 1. Open the lid of the appliance.
Fig 2. Press the blender into the pot.
Fig 3. Pour milk into the pot, at a maximum of 350 ml, which is the level marked with –350 ml. If
more milk is poured into the pot you risk an overflow of warm milk!
Fig 4. Close the lid of the appliance.
Fig 5. Put the pot onto the support base. Check that the electrical plug is inserted into the main
socket. Then turn the knob to , or . When you need to speed up to work the
appliance, please wet the bottom of the pot with a little water. See the Fig. below.
WATER
Fig 6. On the support base, touching the selector switch iteratively leads to the following: sign
is to run without heating for ice coffee; sign is to run with heating applied for latte,
sign is to run with heating applied for cappuccino. When you firstly start the appliance, the
indicator light will be on and the blender start to rotate the milk. In about 60 – 300 seconds, the
appliance will stop automatically and the light will be off. The pot is now filled with hot luscious
milk foam that can be poured in your coffee cup. When you need to stop the appliance to work
24