Trebs Comfortmilk Mode D'emploi page 26

WATER
Fig 13. On the support base, touching the selector switch is to heat while running. When you
firstly start the appliance, the indicator light will be on and the blender start to rotate the hot
chocolate/soup. In about 300-420 seconds, the appliance will stop automatically and the light
will be off. When you need to stop the appliance to work on halfway, you can touch the selector
switch again or lift up the pot off the base, and it will stop immediately.
Operation---melting chocolate
MILK
CHOCOLATE
MAX
Fig 7. Open the lid of the appliance.
Fig 8. DON'T place the blender into the pot when using small chocolate bars to melt. This can
prevent of braking the blender. When melting chocolate, please put the blender back into the
pot when the chocolate bars have been melted or stir during the process with a little plastic
spoon without putting the blender into the pot. (When using chocolate powder, you can use
the blender to put into the pot).
Fig 9. Pour milk at a max of 150-250 ml into the pot.
Fig 10. Pour no more than 200 grams of chocolate powder or SMALL chocolate bars into the pot.
Fig 11. Close the lid of the appliance.
Fig 12. Put the pot onto the support base. Check that the electrical plug is inserted into the main
socket. Then turn the knob to . When you need to speed up to work the appliance, please
wet the bottom of the pot with a little water. See the Fig. below.
26