Simple Reset - Häfele EFL 30 Instructions D'utilisation

10.1 Simple reset

A simple reset is required in the following cases:
• If the programming key card and clearing key card (master keys) have been lost.
After a simple reset, the allocated master keys are cleared and reallocation is required
(LED continuously flashing in green).
Continued use of the terminal is not possible until a restart with new master keys

( 5. Commissioning, page 36). The locking authorisations for the user keys are retained after
a simple reset.
Prerequisites:
1. Press the reset button.

A brief acoustic signal is heard.
48
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
2. Press and hold the reset button until a long
acoustic signal is heard.

The lock on parametrisation with the MDU
110 mobile programming unit is disabled.

The LED flashes continuously in green.
3. Re-teaching master keys

( 5. Commissioning, page 36)