Complete Reset; Cleaning And Maintenance; Cleaning - Häfele EFL 30 Instructions D'utilisation

10.2 Complete reset

A complete reset resets the furniture lock to the factory settings. All data is cleared. The
furniture lock then has to be reconfigured (
A complete reset is required in the following cases:
• Complete erasing of all data (e.g. in the event of return to stocks / warehouse).
• Resetting of software operation to stand-alone operation (SA).
Prerequisites:
1. Press the reset button.

A brief acoustic signal is heard.

11. Cleaning and maintenance

11.1 Cleaning

Clean outer surfaces of product if necessary:
• with a dry, soft cotton cloth, or
• with a damp cloth and a little washing-up liquid or neutral cleaner

5. Commissioning, page 36.).
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
2x > 1s
2. Press and hold the reset button until two long
acoustic signals are heard.

The LED flashes rapidly in green and red.

All data and access rights are cleared.

The lock switches to commissioning mode

( 5. Commissioning, page 36)
49