Adjusting The Open Time - Häfele EFL 30 Instructions D'utilisation

8.3 Adjusting the open time

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED quickly flashes
green for max. 5 seconds.
3. Hold the clearing key card in front of the
antenna again.

The acoustic signal is heard at one second
intervals.

LED flashes green in parallel to the acoustic
signal every second (max. 30 seconds).
The open time can be adjusted at any time, and is also retained after a power supply
interruption or a simple reset.
The open time can be extended to beyond 30 seconds using a macro with the
MDU 110 mobile programming unit with special functions

( 3.2 Technical data, page 34).
After a complete reset, the set open time is cleared and the factory setting of
3 seconds or deadbolt lock operation are activated.
46
Tag-it ™ISO
Programming key card
5 s
1x/s 1x/s
Tag-it ™ISO
Clearing key card
x
2. Hold the clearing key card in front of the
antenna.

Acoustic signal is heard. LED continues to
flash green quickly.
4. Remove clearing key card after the required
time.


LED switches off.

The open time is set for the lock and all
authorised user keys.