Power Cable; Emergency Lowering Of The Headrest - Vermeiren Pratic HC Mode D'emploi

2.6

Power cable

Below the cross bar of the head slatted frame there is a socket for attaching the relief unit.
1
4

Insert the power cable relief unit (4) into its intended holder(3).

Pull the desired length of power cable (1) so that the power cable (2) can be laid under
the slatted frame without sagging. Be careful to avoid having the cable (2) come under
the traction in any adjustment position.

Fasten the power cable by properly tightening the power cable relief unit(4).

Fix the position of the relief unit by manually tightening the screw joints (5).
2.7

Emergency lowering of the headrest

L
WARNING:
Risk of injury
between the headrest and the frame.
L
WARNING:
Risk of injury
persons are available.
The headrest can be lowered manually (emergency lowering in the case of motor failure).
Procedure: 1. Turn the securing loop of the upper motor over.
2. One person holds the side of the headrest while another person pulls
the suspension pin out and removes the motor from its holder.
3. Lower the headrest gently.
2
5
3
-
Make sure that there are no objects or body parts
-
Emergency lowering is only permitted if at least two
Page 10
1 = Power cable
(power connection)
2 = Power cable
(Transformer
connection)
3 = Holder
Strain relief
4 = Strain relief
Power cables
5 = Screw joint
Strain relief
Pratic HC
2014-06