When the walkie−talkies are connected correctly, the red LEDs light up. They only si-
gnal that the connection is correct and continue to light up even when the battery
packs are fully charged.
The current battery charge status is indicated in the display:
As soon as the indicator flashes in the display and acoustic warning signals are is-
sued, the battery pack needs to be recharged.
Attaching the belt clip
Slide the belt clip in the guide from the
top until it audibly snaps into place. To
detach the belt clip, prize the fastening
tab up a little with your fingernail and
slide the belt clip upwards.
3
Operating Elements
The buttons in this operating manual are subsequently depicted with a uniform con-
tour. Therefore, slight deviations in the appearance of the symbols on the telephone
buttons compared to those depicted here are possible.
Handset
1
Display
2
Volume +,
Increase setting
3
Volume −,
Decrease setting
4
Menu
5
PTT button
6
Transmit ringing tone
Do not charge the walkie−talkies with charging units from other manufactu-
rers.
Full
Operating Elements
Half empty
6
5
4
Empty
1
2
3
29