General Instructions - Brasilia MODA Manuel D'emploi Et Entretien

for the Technician
1.0 TECHNICAL CHARACTERISTICS (FIG. 1.1)
Height (A)
Width (B)
Depth (C)
Weight
Power Supply
Power Supply *
Electrical supply connec.
Electrical supply connec. *
Electrical supply connec. *
Water supply connection
WATER SUPPLY
from mains supply with pressure range 0,05 and 0,65 MPa (0.5 and 6.5 bara)
* Special versions for the domestic market
CONTAINER CAPACITY
Coffee bean container
Single instant powder container
The electrical characteristics of the models are outlined on the
rating plates inside the vending machines.
KNOWING THE MACHINE (Fig.1.2)
1 Coffee assembly with variable delivery chamber and coffee grinder
2 Coffee bin container group
3 Soluble product container group
4 Mixer group
5 Nozzle support (adjustable height)
6 Coffee grounds container
7 Liquid tank
8 Steam lance (optional)
9 Hot water lance
10 Touch selection panel
11 Door
12 CPU
13 N° 2 T10A fuses
14 Door lock
15 Maintenance (Green) and washing (red) buttons
Foreseen use
The machine is exclusively for the dispensing of drinks, prepared mixing food
substances with water (by infusion as far as concerns coffee).
For this purpose use products declared as suitable by the manufacturer for
automatic distribution in open containers.
The plastic cups and the stirrers for sugar mixing will be placed at the
disposal of the user as they are not automatically dispensed by the mod.
Moda Machine.
The drinks must be consumed immediately and in no case are to be kept for
subsequent consumption.
Instructions
mm 595
mm 460
mm 622
kg 65
220-230V; 50Hz
220V; 60Hz
Spina CEE 7/7
plug NBR 14136:2001
plug IRAM 2073
3/4" gas
1,1Kg (3,2 lt.)
1,9 lt.
2.0 PREMISE
2.1 - Important notices for operator
This machine has been designed and constructed in full accordance with cur-
rent safety regulations and is therefore safe for those who follow the ordinary
filling and cleaning instructions as indicated in this manual.
The technician must not under any circumstances remove the guards
that require a tool for removal.
Some maintenance operations (to be carried out only by qualified techni-
cians and specified in the user manual with a warning pictogram) must be
performed with the door open and the machine turned on and functioning.
During these interventions it is strictly forbidden to access to any moving parts
or hot areas (identified inside the machine by specific safety warning signs).
In accordance with the current safety regulations, certain operations are the
exclusive responsibility of the technician, and the ordinary maintenance tech-
nician may have access to specific operations on with specific authorization.
The acquaintance and absolute respect, from a technical point of view, of
the safety instructions and of the danger notices contained in this manual,
are fundamental for the execution, in conditions of minimum risk, for the
installation, use and maintenance of this machine.
2.2

General Instructions

Knowledge of the information and instructions contained in the
present manual is essential for a correct use of the automatic
vending machine on the part of the user .
– Interventions by the user on the automatic vending machine are allowed
only if they are of his competence and if he has been duly trained.
The technician must be fully acquainted with all the mechanisms neces-
sary for the correct operation of the machine.
– It is the buyer's responsibility to
been trained and are informed and regulations indicated in the technical
documentation supplied.
Despite the full observance of the safety regulations by the constructor,
those who operate on the automatic dispensers must be fully aware of
the potential risks involved in operations on the machine.
– This manual is an integral part of the equipment and as such must always
remain inside of the same, so as to allow further consultations on the
part of the various operators, until the dismantlement and/or scrapping
of the machine.
– In case of loss or damage of the present manual it is possible receive a
new copy making application to the manufacturer, with prior indication
of the data registered on machines' serial number.
– The functional reliability and
guaranteed only if original parts are used.
– Modifications to the machine not previously agreed on with the construc-
tion company and undertaken by the technician and/or manager, are
considered to be under his entire responsibility.
All the operations necessary to maintain the machine's efficiency, before
and during it's use are at the users charge.
– Any manipulations or modifications made to the machine that are not
previously authorized by the manufacturer, relieve the latter from any
responsibility for damages deriving from, and will automatically result
in the cancellation of the machine guarantee terms.
– This manual reflects the status at the moment of the emission of the auto-
matic vending machine on the market; possible modifications, upgrading,
adaptaments that are done the machine and that are subsequently com-
mercialized do not oblige BIANCHI Industry Spa neither to intervene
on the machine previously supplied, nor, neither to update the relative
technical documentation supplied together with the machine.
– Bianchi Industry S.p.A. reserves the right to update manuals already
released whenever deemed appropriate and for quality purposes, by up-
dating the on-line version published in the area reserved to the corporate
website.
15
ENGLISH
ascertain that the technician have
optimization of machine's services are