emerio Smart Fryer AF-110152 Mode D'emploi page 4

product will not be any longer in compliance with its
safety class.
11. Never connect or disconnect the plug with wet hands.
12. Never unplug the plug by pulling the power supply cord.
Always pull the plug itself.
13. During installation/cleaning, please pay attention that the
power supply cord will not be squeezed or damaged.
14. Always disconnect the appliance from the mains and
allow the product to cool down to room temperature:
before storing away the appliance; before cleaning or
maintenance; after use; if you are not going to use it for a
long period of time.
15. Clean the product itself with a slightly damp cloth.
16. Never replace a damaged power supply cord by yourself.
In such case, or in case of malfunction, contact an
authorized electrician/service centre for examination,
repair or adjustment because special tools are required.
17. Make sure that the power supply cord does not come into
contact with any parts, which generate excessive heat.
18. If you assume that the operating of the product without
danger is not any longer possible please make sure that
the product will be disconnected and not used any longer.
The safe operation of this product is not any longer
possible, if: the product or the power supply cord is
damaged in any way; the product does not work any
longer; after a longer storage under unfavourable
conditions; after heavy damage through transportation.
19. Never immerse the plug or the appliance in water or
other liquid.
20. Never place the appliance directly into corners and under
flammable materials such as curtains, cupboards etc.
21. Never leave the appliance unattended during use.
22. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
23. This appliance is not designed for commercial use.
- 3 - AF-110152