Scrapping The Product - S&P CXRT Notice D'utilisation Et Entretien

7. Scrapping the product

Sort the materials in accordance with national
environmental regulations and deliver the materials either
for recycling or proper disposal. Materials used in
manufacturing are described in Table 7.1. Final handling
of the bearing takes place according to SKF instructions.
Table 7.1 Manufacturing materials.
Component
Casing
Back plate, tongue
Side plate, inlet cone
Inlet cone, spark-free const. (sizes 014...071)
Inlet cone, spark-free const. (sizes 080...100)
Bearing
Bearing bracket (sizes 014...071)
Bearing bracket (sizes 080...100)
Anti-vibration damper
Bearing
Impeller
Impeller LB and HB (sizes 022...028)
Impeller LB and HB (sizes 031...100)
Impeller LF
Hub LB and HB
Hub LF
Shaft
Base frame GT-3 and GT-5
GT-3 sizes (025...100)
GT-3 sizes (100...140)
Belt drive GT-3 and GT-5
Belt pulley
Adapter sleeve
Belt
Motor
See motor manufacturers' instructions
Accessories
Feet/Frame
Flange
Flexible connection duct
Material
Galvanized steel
Galvanized steel
Brass
Copper
Galvanized steel
Steel
EPDM
Special steel
Steel
Steel
Galvanized steel
Aluminium
Welded
Steel
Galvanized steel
Galvanized steel
Cast iron
Cast iron
Rubber
Galvanized steel
Galvanized steel
PVC-textile
CXRT, GT
15