Function And Construction Of The Fan; Fan Construction - S&P CXRT Notice D'utilisation Et Entretien

CXRT, GT

2. Function and construction of the fan

The fan is used to generate a desired air volume at a
given pressure rise which corresponds to the pressure
losses in the duct system to which the fan is connected.
This is achieved by driving the fan impeller.

2.1 Fan construction

CXRT
1. Fan
2. Motor shelf
3. Motor
4. Flexible connection duct, inlet side (optional accessory)
5. Flexible connection duct, outlet side (optional accessory)
6. Vibration dampers, 4 pcs (optional accessory))
Fig. 2.1 CXRT fan construction parts.
GT-3 sizes 025...071
1. Fan
2. Fan base frame
3. Motor
4. Tensioning of the belt drive
5. Motor slide rails
6. Belt guard
7. Vibration dampers, 4 pcs (optional accessory)
Fig. 2.2 GT-3 fan type construction parts (sizes 025 ...071).
4
Installation instructions
GT-3 sizes 080...100
1. Fan
2. Frame
3. Motor
4. Motor fastening bolts
5. Motor bracket
6. Belt guard
7. Vibration dampers (optional accessory)
Fig. 2.3 GT-3 type fan construction parts
(sizes 080...100).