Using The Console; General Parameters - S&P CTB ECOWATT Instructions De Montage Et D'utilisation

The console has a LCD display of 2x16 characters,
4 buttons and 3 LED's.
• Button "Up"
• Button "Down"
• Button "+"
• Button "-"
• LED power supply ON
• LED "activity" Modbus
• LED error

6.3. USING THE CONSOLE

When modifying the confi gured parameter, the buttons on the console have the following functions:
Button Function
Increase parameter value
Decrease the parameter value
Enter
Exit
When navigating through the menus, the button function is different and depends on the existing indications on the display.
Each button performs the function indicated just above it.
Examples:
ENTRAR PASSWORD:
1 1 1

6.4. GENERAL PARAMETERS

Once the wiring is done, turn on the device using the ON/OFF switch. When connecting the unit it will appear some screens:
Button
OK
Button
38
SOLER&PALAU
Modbus RTU v3.1
Function
Modify the value of 1st digit
Modify the value of 2nd digit
Modify the value of 3rt digit
OK. Validate
Function
NO = Exit
Reduce cannel value
Increase cannel value
YES = Validate