Sonnenkonig SECCO 3000 Mode D'emploi page 55

6. Select Add device
8. Enter the correct
WLAN password.
10. The operation screen
of the machine appears.
7. From the alphabetical list,
select the category: «Dehumi-
difier
55
9. Select «Close» when
the connection has been
successfully established.
If no connection has been
established, follow the
instructions on the app.
11. Select «...» at the top right
of the operation screen and
then select «Change device
name» to give your device a
logical name so that you know
which device it is.
Your device and smartphone
are now set up for remote
control via WLAN.
EN