Raising The Rear Leg; Releasing The Cow From The Box; Safety Instructions - MS Schippers 0604522 Mode D'emploi

Raising the rear leg

Let out the winch so that you have enough rope to raise the rear leg. Wrap the leg tether around
the cow's leg and under the cow's knee. Secure the tether in the hook on the rope and then raise
the rear leg using the winch, so that the leg comes into contact with the rump bar. The spring-
assisted rump bar will rise with the leg. Raise the leg to the required height with the winch. Check
that there is still sufficient play in the spring-loaded section of the rump bar. Let the winch back out
and release the leg tether. Store the leg tether in a safe location.

Releasing the cow from the box

Lower the belly band completely until it is lying on the tread plate once more. Release the lock on
the right-hand pipe of the head bail, so that the pipe is fully open. Now swing the head bail open
over the cow's head and allow the cow to leave the box calmly. Close the head bail again. Open
the rump bar so that the machine is ready for the next cow.

Safety instructions

Safety labels are displayed on the various parts of the machine. These labels indicate potential risks
to users. Users should be fully aware of the risks prior to use; if in doubt, please contact your
supplier.
The user is responsible for the health and safety of persons and animals in the working area.
The supplier accepts no liability for damage or injury to persons or animals.
Weight: approx. 350 kg
Torsion axle: max 750 kg
Dimensions: 260x100x210 (LxWxH in cm)
Height clearance: 167 cm
Max speed: 80km/h
NOTE!
Re-tighten wheel bolts once per month.
11