Possible Malfunctions; Waste Disposal; Bartscher Gmbh - Bartscher A120455 Mode D'emploi

7. Possible Malfunctions

Problem
After the temperature is
set, the indicator diodes
do not light up.
The device is switched on,
the temperature knob is
set, but the device does
not heat up.
Device does not work.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!

Bartscher GmbH

Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 24 -
• Plug not connected to
outlet.
• Indicator diode damaged.
• Heater damaged.
• Overheat protection
actuated.
For the disposal of the device please consider
and act according to the national and local rules
and regulations.
Cause
phone: +49 (0) 5258 971-0
fax:
Solution
• Place plug in electric
outlet.
• Contact your vendor.
• Contact your vendor.
• Press the RESET button
in the lower part of the
device.
+49 (0) 5258 971-120