Product Description - SKF TMVM 1 Mode D'emploi

3.

PRODUCT DESCRIPTION

11. Main switch
To switch the instrument on/off; press and hold
for at least three seconds.
To display the menu guide; press and release.
12. Display
Measuring values: rotor used and viscosity
value.
Error messages and service recommendations
13. Holder (optional)
To set the viscometer in the correct measuring
position when using a lab stand.
14. Support stand.
Not supplied by SKF
15. Point of orientation
To hold the instrument correctly, see figure 6.
16. Battery compartment lock
To open 17 use a screw driver.
17. Battery compartment
4x alkaline batteries type AA (LR06) 1.5 V or
rechargeable batteries >700 mA.
18. Fixing points
Stops used to mount the viscometer in the
holder 13 (optional).
Automatically results in the correct position of
the measuring instrument.
19. Protection studs
To protect the measuring shaft when placing
the instrument on a flat surface.
20. Drive shaft
To suspend a rotor.
SKF TMVM 1
Fig. 2
Fig. 3
Fig.4
Fig. 5
9