Function Checks Of The Charger; Safe Handling Blade; Sharpening The Cutting Plate; Changing The Blade - B.Braun Aesculap FAV5 CL/FORTIS Mode D'emploi

Aesculap Suhl GmbH
Battery-powered clipping machine FAV5 CL/FORTIS

4.3 Function checks of the charger

Carry out a visual inspection.
Prior to connecting the product to mains power:
– Check mains power cord 5 for possible damage.
– Check the product for any damage (e.g. bent con-
tacts of the charging bays).
Plug in mains power cord 5 at the device socket of
the charging station.
Plug in the mains plug at the mains power socket.
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
Place battery-powered clipping machine FAV5 CL/
FORTIS 2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 lights up red.
After charging, the charge state indicator 7/9
shines green and the battery-powered clipping
machine FAV5 CL/FORTIS 2/Li-ion battery 8 is
ready for operation.
The product is ready for operation.

4.4 Safe handling blade

4.4.1 Sharpening the cutting plate

Note
For sharpening the cutting plate, please contact Tech-
nical Service, see Chapter Technical Service.
8

4.4.2 Changing the blade

Risk of injury caused by sharp cut-
ting plates!
Handle the blade of clipping
WARNING machine FAV5 CL/FORTIS with
appropriate caution.
14
Fig. 3
Press ON/OFF switch 11 to switch off battery-pow-
ered clipping machine FAV5 CL/FORTIS.
Press blade lock 14, see Fig. 3.