Gt203/Li-Ion Battery Gt201; System Set-Up; Connecting The Accessories; Attaching The Blade - B.Braun Aesculap FAV5 CL/FORTIS Mode D'emploi

Aesculap Suhl GmbH
Battery-powered clipping machine FAV5 CL/FORTIS
4. Working with the battery-
powered clipping machine
FAV5 CL/FORTIS, and the
charger GT203/Li-ion battery
GT201

4.1 System set-up

4.1.1 Connecting the accessories

Combinations of accessories that are not mentioned in
the present instructions for use may only be employed
if they are specifically intended for the respective
application, and if they do not compromise the perfor-
mance and safety characteristics of the products.

4.1.2 Attaching the blade

Risk of injury caused by sharp cut-
ting plates!
Handle the blade of clipping
WARNING machine FAV5 CL/FORTIS with
appropriate caution.
Note
The blade GT330 #10 (USA+UK) for battery-powered
clipping machine FAV5 CL/FORTIS is included in the
scope of delivery. Various blades are available for dif-
ferent applications!
6
13
Fig. 1
If the knife hinge is closed: Open knife hinge 13
with a screwdriver, see Fig. 1.
12
Fig. 2
Install blade 12 on open knife hinge 13, see Fig. 2.
Press ON/OFF switch 11.
Press blade 12 gently in the direction of the clip-
ping machine FAV5 CL/FORTIS, see Fig. 2.
The blade 12 engages with an audible click.
Ensure that the blade 12 is fitted correctly on the
clipping machine FAV5 CL/FORTIS.
13