Commissioning; Commissioning The Anti-Static Bar Through The Iq Easy Platform - ITW SIMCO ION Performax IQ Easy Mode D'emploi

white
brown
yellow/green or grey
black
blue
(Cable side view)
Figure 7: Wiring of the Performax IQ Easy and Performax IQ Easy Speed
- Use a connection cable with a M12 connector, female, 5 pins, for connecting the anti-static
bar to the power supply.
- Connect the wiring as shown in figure 7.

6 Commissioning

Note:
- The anti-static bar does not work if the emitters are covered. The protection cover is
meant to protect the emitters during transport and mounting.

6.1 Commissioning the anti-static bar through the IQ Easy Platform

If an "Undefined param" appears in the info screens of the bar on the
Manager, the Manager must be supplied with the newest software.
Download the latest software version on
and follow the "Upgrade" instructions as described in the manual of the Manager.
- Remove the protective cap from the anti-static bar.
- When the M12 connection cable connects the anti-static bar and the IQ Easy platform,
communication will be established automatically, which is indicated by flashing status LEDs.
By default, the bar will activate after all information has been gathered by the Manager. This
is indicated by the background colour of
Please refer to the Manager IQ Easy user manual for a general explanation.
The bar will now ionise.
PerformaxIQEasyPerformaxIQEasySpeed_UM_9752154110_NL_D_GB_FR_V1_5
white
brown
yellow/green or grey
black
blue (GND)
www.simco-ion.co.uk/software
changing to blue.
64