Basic Functions; Flush Volume - Villeroy & Boch ProDetect 2 Mode D'emploi

Operation

17.4 Basic functions

The basic functions will be activated by the top panel buttons, which can interrupt any process
any time.

17.4.1 Flush volume

The quoted flush volumes refer to a nominal pressure of 3 bar (flow pressure). The flush volu-
me can vary at other water pressures, depending on the flow behaviour of the hydraulic compo-
nents.
Setting the flush volume
Example
Set flush volume to 3.0 litres.
1. Push flush volume key 3 times.
The LED lights up for a total of 3 times.
S. 60
P h
. .
P h
. .
P h
. .
P h
. .
fa o y