Technical description
16.4 Sensor unit
The sensor unit is connected to the controller by a cable. The sensor unit is mounted on the ce-
ramic at a specified position in the area of the siphon inlet.
The mounting position varies with the type of urinal installed, in order to ensure optimum sen-
sor operation. For this, comply with the sensor positions in the separate installation instruc-
tions.
16.5 Bluetooth adapter (optional)
The Bluetooth adapter provides wireless communication between the urinal controller and a
compatible Bluetooth-enabled device (tablet PC, smartphone). The app can be used to change
the settings, and to read out the diagnostic and statistics data.
The Bluetooth adapter is installed between the controller and the power supply.
Minimum requirement for Bluetooth-enabled devices:
IOS 8
•
Android 4.3
•
S. 56
Advice!
Mains model
The Bluetooth adapter can be used only with mains operation.