Machine Status - ZUMEX Speed Manuel De L'utilisateur

On your Display Digital, you will see symbols such as these:
Continuous Mode
Non-continuous Mode Intermediate
Auto
Continuous Mode with "Self Cleaning"
Auto
Non-continuous mode, high speed with "Self Cleaning"
The PulpOut system can always be stopped by pressing the STOP button. In continuous mode
with "Self Cleaning" the STOP button must be pressed twice, once to stop the machine and
the second time to stop the self cleaning.
CALIBRATION: You can calibrate the machine to guarantee that the machine count is correct
at all times.
MACHINE STATUS: You have access to the different anomalies that a machine stoppage
may have caused.
CONTRAST: You can adjust the brightness level on the display.
Remember! Within the CLIENT MENU mode:
"Press OK" to go down a level.
"Press OK at least 2 seconds" to go up a level.
"Press OK at least 2 seconds" to save data (The save symbol will appear).
To exit CLIENT MENU, you must go up the same number of levels you have gone down.
Menu diagram
Main menu
BASIC
AUTOMATIC
015.030
PIN
****
OK
1 2 3 4
Language Pin Counter Mode
OK OK OK OK
1
LANGUAGE. Select the language
to operate the machine.
2
PIN. See or change the PIN.
3
COUNTER. See total or partial
counter of the machine.
4
MODE. Select the working mode:
automatic or professional.
5
WASTE LIMIT. Activate a warning to
know when to empty the waste bin.
MENU
5 6 7 8
PulpOut Calibration Status
Waste Limit
OK OK OK OK
PULPOUT. Choose the mode for the
Automatic PulpOut System.
CALIBRATION. To calibrate the machine
for correct count.
STATUS. Access the different anomalies
that a machine stoppage may have
caused.
CONTRAST. To adjust the brightness level
on the display.
EN
9
Contrast
OK
6
7
8
9
61