Eu Declaration Of Conformity - Güde 40026 Traduction Du Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions?
We will quickly help you and without needless bureaucracy at our home page www.guede.com in the Service part. Please help us be able to
GB
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
can be found on the type label. Please enter the data below for future reference.
Serial No.:
Tel.:
+49 (0) 79 04 / 700-360
Marking:
Product safety, Prohibitions:
Product corresponds to appropriate
standards of the EU
Warning, Commands:
Warning/Attention
Commands, Environment protection:
Wear a respirator!
Package, Technical data:
This side up
Supply includes (picture 1)
1.
Control lever
2.
Exhaust throat
3.
Compressed air inlet
4.
Eccentric sheave
5.
Control regulator
Appliance
Pneumatic Eccentric grinder
Professional pneumatic eccentric grinding machine with
a foul air hose suitable for grinding of jointing and enamel
material and fine grinding of wood pr plastic material.

EU Declaration of Conformity

GB
We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen,
Germany, hereby declare the conception and construction of the below-
mentioned appliances correspond - at the type of construction being
launched - to appropriate basic safety and hygienic requirements of EC
Directives.
In case of any change to the appliance not discussed with us the
Declaration expires.
Pneumatic Eccentric grinder
Marking of appliances:
Date/producer signature: 12.04.2010
Signed by: Mr Arnold, Managing Director
Appropriate EU Directives:
2006/42/EG
Harmonised standards used:
DIN EN 792-8+A1:2008
EN 28662-1:1993
DIN EN 15744:2008
Illustrative pictures! Translation of original operating instructions.
Order No.:
Fax:
General prohibition
(in connection with any other icon)
Read the Operating Instructions
before use
Dispose the waste professionally in
order not to pollute the environment.
Weight
Order No. 40026
Year of production:
+49 (0) 79 04 / 700-51999
Wearing loose clothes prohibited!
Wear earphones!
Packing cardboard material may be
delivered to collecting centres for
recycling.
Technical data
Air connector-thread:
Service pressure:
Air consumption:
Max. free-running revs:
Grinding surface Ø:
Weight:
Order No.: 40026
General safety instructions
Safety notice! Failing to follow these instructions
can cause an injury to you or other persons.
1.
Read the following Operating Instructions for using
the pneumatic appliance and follow the safety
instructions for using the pneumatic appliance.
2.
ALWAYS wear approved protective glasses,
earphones and a respirator.
3.
Take off your watch, rings and other disturbing items.
Loose clothes or jewellery can get caught in the
compressor and can lead to serious injuries.
4.
Use hose piping.
5.
The control lever MUST be in the "OFF" position if the
appliance is connected with the air supply.
6.
Disconnect the appliance from air supply if not used.
NEVER replace any parts of the accessories or
SERVICE them if the appliance is connected with the
air supply.
7.
Ensure a safe distance. Make sure you did not lose
balance.
5
E-Mail:
support@ts.guede.com
No jewellery
Wear protective glasses!
Any damaged or disposed electric
or electronic devices must be
delivered to appropriate collection
centres.
1/4 "
6 bar
340 l/min.
5000-10000 U/min.
150 mm
ca. 2 kg

Publicité

Table des Matières
loading

Table des Matières