Using Your Towel Radiator And Blower - Zehnder Roda Twist Spa Air Mode D'emploi

EN

3.2 Using your towel radiator and blower

3.2.1 name of the various Leds on your towel radiator
Radiator ON/OFF dial
Radiator ON/OFF LED
The heating Led indicates:
- that the radiator heating element is powered, when it is on;
- that a temperature sensor fault has been detected, when it is blinking.
If this occurs, refer to chapter 4 to solve the problem.
When the remote control is switched on, the mode Led indicates that a setpoint
temperature has indeed been registered by the radiator.
In the case of a pilot wire, the LED is on when the programming base unit is in
Comfort mode. This LED will remain off in any other operating mode.
When turned on, the radiator On/Off Led indicates that the radiator is ready
to receive instructions from the remote control to start (see chapter 3.1).
nOTe The blower operation and that of the electric radiator are independent. Your
blower can therefore operate when your radiator is switched off and vice-versa.
3.2.2 name of the various Leds on your blower
Blower ON/OFF dial
Blower ON/OFF LED
38
Heating LED
Mode LED
Filter LED
Alarm LED