Zehnder Roda Twist Spa Air Mode D'emploi page 36

EN
Access the advanced settings of your remote control to decide whether to
instruct the appliance to perform:
- a boost of the radiator alone (default setting),
- or a blower boost,
- or a radiator boost + blower boost.
The selected parameter will affect programmes P1 and P2 (see chapter 3.3,
parameter 3).
The blower boost time and the radiator boost time can be modified (see
chapter 3.3, parameters 1 and 2).
ImPOrTAnT Starting a manual boost while P1 and/or P2 are activated will not
cancel the existing programming, which will take place as scheduled.
3.1.3 Setting a daily programme
Press and hold P1 or P2 to access the start time setting of the selected
programme.
Symbols P1 or P2 and
P2 is displayed.
The start time of programme P1 or P2 can be adjusted in 15-minute increments
by pressing the + and - keys.
Press P1 or P2 briefly, or do not press any keys for 10 seconds to quit setting
mode. The start time is saved and P1 or P2 is activated.
a
C
36
start to blink, and the start time of programme P1 or
B
d