Use; Using The Remote Control - Zehnder Roda Twist Spa Air Mode D'emploi

3. Use

3.1 Using the remote control

3.1.1 Commissioning
Pry off the frame (A). Remove the battery insulation tab and reposition the frame.
After the start-up phase, the set time LED
blinks. Immediately press the + or - key to set the time on your remote control.
Press and hold the + or - key to speed up the process.
Once the time is set, wait approximately 10 seconds (or press the P1 or P2 key).
The is no longer displayed and the time has been set.
Please follow the instructions below in the event of an incorrect time setting.
is displayed and 00:00
EN
Use 33