Using Your Appliance - Zehnder Nova NEO Mode D'emploi

GB

2. Using your appliance

2.1 The radiator functions
The built-in control panel (see opposite) has the following functions:
Turn the forced convection function ON/OFF. Press the ON/OFF button (2)
to enable or disable the fans. The green LED (1) is illuminated when the fans
are switched on.
Select fan speed (LEDs, 4). Press the button (3) repeatedly to select:
Level 1: low speed (the left-hand LED lights up)
„ „
Level 2: medium speed (the middle LED lights up)
„ „
Level 3: high speed (the right-hand LED lights up). The fans will start at
„ „
high speed (boost) and revert to level 1 automatically after one hour.
Note: each time the required room temperature is reached, your water
supply (boiler or heat pump) will stop supplying hot/cold water to your
appliance.
To save energy, the sensors in your appliance will detect this and switch
the fans off automatically, whatever fan speed you have selected.
The LED corresponding to the selected speed will remain ON even if the fans
are OFF (see Appendix for more information about fan operation logic.).
8