Advanced Remote Control Settings - Zehnder Roda Twist Spa Air Mode D'emploi

When the blower is powered, the On/Off Led indicates that the blower function
can be activated by the remote control.
The alarm Led indicates a blower failure. Refer to chapter 4 to identify the
cause of this alarm.
The filter Led indicates when it is time to clean the filter (see chapter 4.2).
This LED also informs you of the absence or incorrect positioning of the filter on
the blower. If this is the case, the alarm and filter LEDs will blink simultaneously.
3.3 Advanced remote control settings (for advanced
users)
Some of the remote control parameters can be adjusted. The following informa-
tion will allow you to access these parameters and modify them according to your
intended use.
Access to the parameter settings is made with the remote control switched off.
If necessary, press and hold
Once the remote control has been switched off, press and hold keys P1 and
P2 together to access the settings menu. The following information will then be
displayed on the remote control screen:
Parameter number
Press P2 to access the next parameter. (0
Press P1 to access the previous parameter. (2
to switch it off.
Parameter value
1 2...)
1 0)
EN
Use 39