Tig Welding; Mma Welding - STAMOS S-MTM 220 Manuel D'utilisation

NOTE: FLUX (FCAW (Flux-Cored Arc Welding)) requires a change of the polarizati-
on inside the welder. Picture below is showing standard connection when using MIG/
MAG welding with solid wire. In order to use the device for welding with FLUX wire,
the connection should be swapped, connecting the cable to the clamp marked with
(-):
MIG/MAG WITH USING THE SPOOL GUN:
1 – Spoolgun
2 – Workpiece
3 – Earth clamp
4 – Gas cylinder
5 – Gas meter
6 – Gas meter AC 36V
7 – Power supply
EN
26
Rev. 15.05.2020

TIG WELDING:

1 – Electrode holder
2 – Workpiece
3 – Earth clamp
4 – Gas cylinder
5 – Ar meter
6 – Power supply

MMA WELDING:

1 – Electrode holder
2 – Workpiece
3 – Earth clamp
4 – Power supply
Rev. 15.05.2020
EN
27