Installing Door Frame Heater Plug On Freezer Models; How To Mount The Lamp - Porkka SP17783 Instructions D'emploi Et Montage

Fasten the cover plate of the machinery unit with white-heel pull
rivets of Ø 3.2 mm.
INSTALLING DOOR FRAME HEATER PLUG ON FREEZER
MODELS
On a freezer unit there will be a short cable with plug fi tted, this
should be inserted in to the corresponding socket next to the
door frame. A small amount of silicon can be used to seal the
socket from any moisture penetration. Install the
protector around the plug see the pic.10.
Pic. 10. Door frame heater plug protector

HOW TO MOUNT THE LAMP

7700220
2
Screw
2
1
Snap-on
VH2343
6