Porkka SP17783 Instructions D'emploi Et Montage page 5

1.
2a.
2b.
3.
4.
The end of the cord has been set in next to the urethane tongue
and groove. Take the cord up carefully.
The heating cable can be connected to either side close to the
corner. Use a connecting box and components with CE
approval that fulfi l the local regulations concerning electrical
safety.
Drill a hole of Ø13 mm for the cord. Fix the wall bushing in to
the hole that comes with the delivery.
Fill the groove with silicone to make the tongue and groove
tight.
4