Servo Mode Partial Light Output Settings; Learn Function - Metz mecablitz 52 AF-1 Pentax digital Mode D'emploi

9.5.3 Servo mode partial light output
SYNC
M-SERVO
• Press the sensor button
Z
24 mm
OOM
INFO P
1/8 -2 /
3
• Press sensor buttons
1/16
-1
1/16 /
3
SYNC
M-SERVO
• Press the sensor button on the touch dis-
Z
24 mm
OOM
The partial light output is adopted.
INFO 1/16
k
Once the slave flash units have achieved
flash-readiness, the AF measurement flash
flashes.
A slave remote channel cannot be set in
SERVO mode.
The camera flash unit may not work in the
remote mode.
162
settings
P
for partial light
output on the touch display as many times
as it takes for the partial light output dis-
play to appear.
touch display and set the desired partial
light output to 1/1, 1/2, 1/8 or 1/128.
play for the selected partial light output
1/16
(e.g. (z.B. 1/16).
on the
+

9.5.4 Learn function

The "Learn function" enables individual auto-
matic adjustment of the slave flash unit to
the flash technology of the camera's flash
unit.
In the process, one or more pre-flashes, e.g.
to reduce the "red-eye effect" of the camera
flash unit can be taken into account.
The slave flash unit is then fired to coincide
with the main flash that illuminates the actu-
al picture.
If the camera's own flash device provides for
automatic focussing AF measuring flashes,
then due to the system characteristics no
learn operation is possible. If possible, use
another camera mode or change to manual
focussing.