Monitoring Of Test Resources; Basic Safety Precautions; Pay Attention To The Instructions In The Operation Manual; Transport And Storage - KERN and SOHN MWB 300K-1 Notice D'utilisation

6.4 Monitoring of Test Resources

In the framework of quality assurance the measuring-related weighing properties of
the balance and, if applicable, the testing weight, must be checked regularly. The
responsible user must define a suitable interval as well as type and scope of this test.
Information is available on KERN's home page (www.kern-sohn.com) with regard to
the monitoring of balance test substances and the test weights required for this. In
KERN's accredited DKD calibration laboratory test weights and balances may be
calibrated (return to the national standard) fast and at moderate cost.

7 Basic Safety Precautions

7.1 Pay attention to the instructions in the Operation Manual

 Carefully read this operation manual before
setup and commissioning, even if you are
already familiar with KERN balances.

8 Transport and storage

8.1 Testing upon acceptance

When receiving the appliance, please check packaging immediately, and the
appliance itself when unpacking for possible visible damage.

8.2 Packaging / return transport

 Keep all parts of the original packaging for a possibly required
return.
 Only use original packaging for returning.
 Prior to dispatch disconnect all cables and remove loose/mobile
parts.
 Reattach possibly supplied transport securing devices.
 Secure all parts e.g. weighing platform against shifting and
damage.
10 MWB-BA-e-1710